LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1602 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Sealing Washer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seal washer from the A/C refrigerant component.
    IMPORTANT: Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
  2. Inspect the seal washer for signs of damage to help determine the root cause of the failure.
  3. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
    IMPORTANT: DO NOT reuse sealing washer.
  4. Discard the sealing washer.
Fig 1: Correct Installation Of Sealing Washer
G01478986Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals