LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1602 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Mode Door Replacement - Lower (Delphi) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lower mode door (9) to the HVAC module assembly (10).
  2. Install the air temperature separator plate (5) to the HVAC module assembly (10).
  3. Install the HVAC module assembly halves.
    NOTE: Refer to FASTENER NOTICE .
    IMPORTANT: For every heat stake removed ensure that you install a screw.
  4. Install the screws to the HVAC module assembly.

    Tighten 

    Tighten the screws to 1.6 N.m (14 lb in).

  5. Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement .
Fig 1: Lower Mode Door, HVAC Module Assembly & Air Temperature Separator Plate
G01479154Courtesy of GENERAL MOTORS CORP.