Installation Procedure
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the defroster door (8).
- Install the mode actuator cam assembly.
- Install the mode actuator.NOTE: Refer to FASTENER NOTICE .
- Install the mode actuator screws.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
- Install the HVAC module assembly halves.
IMPORTANT: For every heat stake removed ensure that you install a screw.
- Install the screws to the HVAC module assembly.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
- Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement .