LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Steering Column & Steering Column Switches) >> Removal & Installation >> Steering Column >> Removal ("C", "K", "L", "M", "S" & "T" Series)

Removal ("C", "K", "L", "M", "S" & "T" Series)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2001 Pontiac Montana, 2001 Oldsmobile Silhouette, 2001 Oldsmobile Bravada, 2001 GMC Sonoma, and 2001 GMC Savana Special. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove air bag module (if equipped). See appropriate AIR BAG RESTRAINT SYSTEMS article. Remove steering column trim panels. On models with column shift, disconnect transmission control cable. On all models, remove steering wheel. See STEERING WHEEL .
  2. Disconnect steering column harness connectors. Remove nut and bolt from upper to lower shaft connection. Remove upper and lower steering column support nuts. Remove steering column, rotating column to allow shift lever to clear instrument panel opening, if necessary.
scientia non olet · About LEMON Manuals