LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Steering Column & Steering Column Switches) >> Removal & Installation >> Steering Column >> Installation

Steering Column: Installation

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2001 Pontiac Montana, 2001 Oldsmobile Silhouette, 2001 Oldsmobile Bravada, 2001 GMC Sonoma, and 2001 GMC Savana Special. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Tighten upper and lower steering column mounting bolts to specification. Tighten upper intermediate steering shaft bolt and nut to specification. See TORQUE SPECIFICATIONS .



To install, reverse removal procedure. Tighten steering column bracket-to-instrument panel carrier bolts/nuts to specification. See TORQUE SPECIFICATIONS .



To install, reverse removal procedure. Tighten upper and lower steering column mounting bolts to specification. Tighten upper intermediate steering shaft pinch bolt to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals