MULTIFUNCTION Switch: Installation
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2001 Pontiac Montana, 2001 Oldsmobile Silhouette, 2001 Oldsmobile Bravada, 2001 GMC Sonoma, and 2001 GMC Savana Special. However, it is still accessible from the selected car via links, so may be relevant.
Install multifunction switch. Using small, flat-blade screwdriver, compress electrical contact and move switch into position. Ensure electrical contact rests on cancel cam. Tighten multifunction switch screws to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.