LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1597 (Seat Belt System) >> Repair Instructions >> Seat Belt Side Buckle Replacement - Rear (TrailBlazer, Envoy, Bravada) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust the rear seats and seat backs to a cargo position.
  2. Loosen the center seat belt anchor bolt that retains the seat belt to the seat belt buckle/anchor plate assembly.
  3. Remove the left rear seat back rear mounting nut that retains the left seat back to the floor panel.
    Fig 1: View Of Rear Seat Belt Side Buckle
    GM753725Courtesy of GENERAL MOTORS CORP.
  4. Remove the assembly clip that retains the seat belt buckle/anchor plate assembly to the rear seat back hinge bracket.
  5. Remove the seat belt buckle and anchor plate assembly from the rear seat back hinge bracket.
  6. Remove the center seat belt anchor bolt from the seat belt buckle/anchor plate assembly.
  7. Remove the center seat belt anchor from the seat belt buckle/anchor plate assembly.
scientia non olet · About LEMON Manuals