Removal Procedure
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear seat back assembly. Refer to SEAT CUSHION REPLACEMENT - REAR NO. 1 (TRAILBLAZER, ENVOY & BRAVADA) or SEAT BACK REPLACEMENT - REAR NO. 1(TRAILBLAZER EXT & ENVOY XL) in Seats.
- Remove the rear seat belt anchor nut from the seat belt buckle bracket.
- Remove the rear seat back seat belt bezel by pressing in the buttons (1) on the plastic retainers.
- Remove the seat belt bezel from the seat belt.
- Remove the seat back cover and pad. Refer to SEAT BACK COVER AND PAD REPLACEMENT - REAR NO. 1 (TRAILBLAZER, ENVOY & BRAVADA) or SEAT BACK COVER AND PAD REPLACEMENT - REAR NO. 1 (TRAILBLAZER EXT & ENVOY XL) in Seats.
- Remove the seat belt from the retractor bracket by guiding it through the slot.
- Remove the rear seat belt center retractor retaining nut.
- Remove the center retractor assembly by pulling the push pin from the seat back frame.
- Remove the seat belt retractor bracket bolt (1) from the bracket and seat back frame.
- Remove the seat belt retractor bracket from the seat back frame.
Fig 2: Rear Seat Back Seat Belt Bezel By Pressing In Buttons On Plastic Retainers (TrailBlazer, Envoy & Bravada)