LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1596 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - No. 1 Center Rear (TrailBlazer EXT & Envoy XL) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 screws securing the inboard rear seat back cushion latch cover.
    2. Fig 1: Screws Securing Inboard Rear Seat Back Cushion Latch Cover (TrailBlazer EXT & Envoy XL)
    G01642549Courtesy of GENERAL MOTORS CORP.
  2. Remove the rear seat belt anchor nut (2) securing the seat belt (1) to the seat frame.
    3. Fig 2: Rear Seat Belt Anchor Nut Securing Seat Belt To Seat Frame (TrailBlazer EXT & Envoy XL)
    G01642550Courtesy of GENERAL MOTORS CORP.
  3. Pull the seat back cover and pad up to expose the seat belt bracket bolts. Refer to SEAT BACK COVER AND PAD REPLACEMENT - REAR NO. 1 (TRAILBLAZER, ENVOY & BRAVADA) or SEAT BACK COVER AND PAD REPLACEMENT - REAR NO. 1 (TRAILBLAZER EXT & ENVOY XL) .
  4. Remove the 2 bolts (2) securing the seat belt bracket (1) to the seat back frame.
    5. Fig 3: Bolts Securing Seat Belt Bracket To Seat Back Frame (TrailBlazer EXT & Envoy XL)
    G01642551Courtesy of GENERAL MOTORS CORP.
  5. Remove the nut (1) securing the retractor assembly (2) to the seat back frame.
    6. Fig 4: Nut Securing Retractor Assembly To Seat Back Frame (TrailBlazer EXT & Envoy XL)
    G01642552Courtesy of GENERAL MOTORS CORP.
  6. Remove the retractor assembly.
scientia non olet · About LEMON Manuals