LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1594 (Interior Trim) >> Repair Instructions >> Door Sill Plate Replacement - Rear (TrailBlazer, Envoy & Bravada) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure that all 3 retaining tabs are attached to the sill plate.
  2. Fig 1: Rear Door Sill Plate To Door Frame (TrailBlazer, Envoy & Bravada)
    G01642037Courtesy of GENERAL MOTORS CORP.
  3. Align the retaining tabs to the door frame slots.
  4. Push down on the sill plate, seating the retaining tabs to the door frame.