LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1593 (Seat System) >> Repair Instructions >> Seat Back Replacement - Rear No. 1 (TrailBlazer, EXT & Envoy XL) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws from the inboard/outboard rear seat back cushion hinge covers.
    Fig 1: Removing Screws From Inboard/Outboard Rear Seat Back Cushion Hinge Covers
    G01641928Courtesy of GENERAL MOTORS CORP.
  2. Remove the rear seat belt anchor nut (2).
    3. Fig 2: Rear Seat Belt Anchor Nut
    G01641929Courtesy of GENERAL MOTORS CORP.
  3. Remove the seat back cover and pad high enough to expose the seat back cushion mounting bolts. Refer to SEAT BACK COVER AND PAD REPLACEMENT - REAR NO. 1 (TRAILBLAZER, ENVOY & BRAVADA)  or SEAT BACK COVER AND PAD REPLACEMENT - REAR NO. 1 (TRAILBLAZER EXT & ENVOY XL)  .
  4. Remove the seat back mounting bolts (2) securing the rear seat back frame to the inboard/outboard rear seat back cushion hinge assembly.
    5. Fig 3: Seat Back Mounting Bolts
    G01641930Courtesy of GENERAL MOTORS CORP.
  5. Remove the seat back assembly.
scientia non olet · About LEMON Manuals