LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1593 (Seat System) >> Repair Instructions >> Seat Back Release Latch Replacement - Rear No. 1 (TrailBlazer EXT & Envoy XL) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the head restraint. Refer to HEAD RESTRAINT REPLACEMENT - REAR SEAT   . 
  2. Remove the two screws securing the seat back release latch handle to the seat back.
    3. Fig 1: Two Screws Of Seat Back Release Latch Handle
    G01641938Courtesy of GENERAL MOTORS CORP.
  3. Remove the seat back cover and pad. Refer to SEAT BACK COVER AND PAD REPLACEMENT - REAR NO. 1 (TRAILBLAZER, ENVOY & BRAVADA)  or SEAT BACK COVER AND PAD REPLACEMENT - REAR NO. 1 (TRAILBLAZER EXT & ENVOY XL)  .
  4. Remove the clips (2) securing the seat back release latch cable to the seat back frame.
    5. Fig 2: Clips Of Seat Back Release Latch Cable
    G01641939Courtesy of GENERAL MOTORS CORP.
  5. Remove the cable from the slot in the cam (1).
scientia non olet · About LEMON Manuals