LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1593 (Seat System) >> Repair Instructions >> Seat Back Hinge Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from the vehicle. Refer to SEAT REPLACEMENT - REAR NO. 1 (TRAILBLAZER EXT, ENVOY XL)  .
  2. Remove the inboard/outboard rear seat back cushion latch covers. Refer to SEAT BACK HINGE COVER REPLACEMENT - REAR NO. 1  .
  3. Remove the rear center seat belt anchor nut (2), if replacing the left-hand seat inboard hinge.
    4. Fig 1: Rear Center Seat Belt Anchor Nut
    G01641951Courtesy of GENERAL MOTORS CORP.
  4. Remove the seat belt side buckle nut (2), if replacing the right-hand seat inboard hinge.
    5. Fig 2: Seat Belt Side Buckle Nut
    G01641952Courtesy of GENERAL MOTORS CORP.
  5. Remove the seat back cover and pad high enough to expose the seat back mounting bolts. Refer to SEAT BACK COVER AND PAD REPLACEMENT - REAR NO. 1 (TRAILBLAZER, ENVOY & BRAVADA)  or SEAT BACK COVER AND PAD REPLACEMENT - REAR NO. 1 (TRAILBLAZER EXT & ENVOY XL)  .
  6. Remove the seat back mounting bolts (2) securing the rear seat back frame to the inboard/outboard rear seat back hinge assembly.
  7. Remove the seat cushion mounting bolts (1) securing the rear seat cushion frame to the inboard/outboard rear seat back hinge assembly.
    8. Fig 3: Seat Back Mounting Bolts
    G01641953Courtesy of GENERAL MOTORS CORP.
  8. Remove the seat back assembly.
scientia non olet · About LEMON Manuals