LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1593 (Seat System) >> Repair Instructions >> Head Restraint Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the head restraint to the full up position by pressing the release tab (2), and by lifting up the head restraint.
  2. Insert a small tool into the head restraint retainer port (1).
  3. In order to release the head restraint retainer, simultaneously lift up on the head restraint while applying inward pressure to the tool in the retainer release port (1).
  4. Remove the head restraint from the seat assembly.
    5. Fig 1: Head Restraint From Seat Assembly
    G01641855Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals