Installation Procedure
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Using a 10 mm (0.3937 in) drill bit, drill the rivnut hex shape hole in the roof out to a round 10 mm hole.
- Install a replacement rivnut to the hole in roof using a rivnut tool, or equivalent.
- Install the luggage carrier. Refer to LUGGAGE CARRIER REPLACEMENT .