LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Exterior Trim) >> Repair Instructions >> Rocker Molding Scuff Plate Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the scuff plate to the rocker.
  2. Apply downward pressure on the scuff plate in order to seat the retaining tabs.
  3. Close the door.
    Fig 1: Positioning Scuff Plate To Rocker - Front
    G01641141Courtesy of GENERAL MOTORS CORP.