Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Use a flat-bladed tool to remove door sill plates from top of rocker molding.

Fig 1: Removing Door Sill Plates From Top Of Rocker Molding (Trailblazer EXT, Envoy XL)
Courtesy of GENERAL MOTORS CORP.
Remove screw (1) from front of rocker panel molding.
Release the push-in retainers (2) from the lower rocker panel molding using a trim removal tool.
Remove upper push in retainer (3).
NOTE: Use a plastic, flat-bladed tool to prevent paint damage when removing an emblem/name plate.
Remove the rocker panel molding from the rocker panel.

Fig 2: Removing Rocker Panel Molding From Rocker Panel (Trailblazer EXT, Envoy XL)
Courtesy of GENERAL MOTORS CORP.