LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1575 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the hook of the wiper arm through the opening in the wiper blade.
  2. Position the wiper blade in the inside radius of the wiper arm hook.
    Fig 1: Inserting Hook Of Wiper Arm Through Opening In Wiper Blade
    G01640626Courtesy of GENERAL MOTORS CORP.
  3. Pull upward until the locking tab of the pivot engages the slot in the hook.
  4. Carefully lower the wiper arm and blade onto the windshield.
    Fig 2: Pulling Upward Until Locking Tab Of Pivot Engages Slot In Hook
    G01640627Courtesy of GENERAL MOTORS CORP.