LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1575 (Wiper System & Washer System) >> Repair Instructions >> Washer Nozzle Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper arms. Refer to WIPER ARM REPLACEMENT   . 
  2. Remove the air inlet grille panel. Refer to AIR INLET GRILLE PANEL REPLACEMENT  in Body Front End.
  3. Remove the washer hose connection (1) from the nozzle.
    Fig 1: Removing Washer Hose Connection From Nozzle
    G01640610Courtesy of GENERAL MOTORS CORP.
  4. Remove the washer nozzles from the air inlet grille panel by squeezing the retaining tabs (1).
    Fig 2: Removing Washer Nozzles From Air Inlet Grille Panel
    G01640611Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals