LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1575 (Wiper System & Washer System) >> Repair Instructions >> Washer Nozzle Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the washer nozzles to the air inlet grille panel, by indexing the tab in the air inlet grille panel to the washer nozzle.
  2. Be sure the retaining tabs (1) are secure.
    Fig 1: Installing Washer Nozzles To Air Inlet Grille Panel
    G01640612Courtesy of GENERAL MOTORS CORP.
  3. Install the washer hose connection (1) to the washer nozzle.
  4. Install the air inlet grille panel. Refer to AIR INLET GRILLE PANEL REPLACEMENT  in Body Front End.
  5. Install the wiper arms. Refer to WIPER ARM REPLACEMENT   . 
    Fig 2: Installing Washer Hose Connection To Washer Nozzle
    G01640613Courtesy of GENERAL MOTORS CORP.