LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1575 (Wiper System & Washer System) >> Repair Instructions >> Hose Replacement (Windshield Washer) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the washer hose to the air inlet grille panel.
  2. Connect the washer hose connections (1) to the washer nozzles.
  3. Connect the washer hose to the clips (2) on the air inlet grille panel.
  4. Install the air inlet grille panel. Refer to AIR INLET GRILLE PANEL REPLACEMENT  in Body Front End.
  5. Install the wiper arms. Refer to WIPER ARM REPLACEMENT   . 
    Fig 1: Installing Washer Hose To Air Inlet Grille Panel
    G01640617Courtesy of GENERAL MOTORS CORP.