LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Switch Replacement - Power >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the switch bezel assembly from the seat assembly. Refer to Seat Switch Bezel Replacement .
  2. Remove the buttons from the switch.
  3. Release the tabs that retain the seat switch to the seat bezel assembly.
  4. Disconnect the electrical connector from the switch.
    Fig 1: View Of Bulkhead Connector
    GM752953Courtesy of GENERAL MOTORS CORP.
  5. Remove the seat switch from the seat bezel assembly.
scientia non olet · About LEMON Manuals