LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Switch Bezel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 screws that retain the switch bezel to the seat.
    Fig 1: Removing/Installing Seat Switch Bezel Retaining Screws
    GM752955Courtesy of GENERAL MOTORS CORP.
  2. Partially remove the switch bezel from the seat.
    Fig 2: View Of Bulkhead Connector
    GM752953Courtesy of GENERAL MOTORS CORP.
  3. Remove the seat switches from the switch bezel by releasing the retaining tabs. Refer toSeat Switch Replacement - Power .
  4. Remove the lumbar switch from the switch bezel by releasing the retaining tabs. Refer toLumbar Switch Replacement - Front 
  5. Remove the switch bezel from the seat.
scientia non olet · About LEMON Manuals