LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Riser Latch Assembly Replacement - Rear No. 2 >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift the seat cushion to expose the seat riser latch assembly (2).
    Fig 1: Locating Seat Riser Latch Assembly
    GM824157Courtesy of GENERAL MOTORS CORP.
  2. Remove the seat riser latch assembly (2) from the outer riser assembly stud (1).
  3. Remove the seat riser latch assembly (1) from the seat latch rod (2).
    Fig 2: Removing/Installing Seat Riser Latch Assembly To Seat Latch Rod
    GM824156Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals