LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the communication interface module if removing the right-hand rear seat. Refer to COMMUNICATION INTERFACE MODULE REPLACEMENT (TRAILBLAZER, ENVOY, BRAVADA) or COMMUNICATION INTERFACE MODULE REPLACEMENT (TRAILBLAZER EXT, ENVOY XL) in Cellular Communications.
  2. Remove the front two rear seat mounting nuts (2) securing the seat to the vehicle.
    Fig 1: Removing/Installing Seat Mounting Nuts
    GM827901Courtesy of GENERAL MOTORS CORP.
  3. Fold the seat to the stowed position.
  4. Remove the rear two rear seat mounting nuts (2) securing the seat to the vehicle.
  5. Remove the seat from the vehicle.
scientia non olet · About LEMON Manuals