LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Latch Rod Replacement - Rear No. 2 >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from the vehicle. Refer to Seat Replacement - Rear No. 2 .
  2. Remove the two bolts (2) securing the rear seat cushion assembly (1) to the seat latch rod (3).
    Fig 1: Removing/Installing Rear Seat Cushion Assembly Mounting Bolts
    GM824146Courtesy of GENERAL MOTORS CORP.
  3. Remove the seat riser latch assembly (1) from the seat latch rod (2).
    Fig 2: Removing/Installing Seat Latch Rod To Seat Riser Latch Assembly
    GM824156Courtesy of GENERAL MOTORS CORP.
  4. Remove the retainer nut (2) from each end of the seat latch rod (1).
    Fig 3: Removing Seat Latch Rod Retainer Nut
    GM824155Courtesy of GENERAL MOTORS CORP.
  5. Remove the seat latch rod.
scientia non olet · About LEMON Manuals