Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the seat from the vehicle. Refer to Seat Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL) .
Remove the rear seat bracket trim covers (1).

Fig 1: Removing/Installing Rear Seat Bracket Trim Covers & Mounting Nuts
Courtesy of GENERAL MOTORS CORP.
Remove the rear seat bracket mounting nuts (2).
Remove the rear seat bracket.
Remove the two bolts (2) securing the support (1) to the seat cushion trim panel.

Fig 2: Removing/Installing Seat Cushion Trim Panel Support Mounting Bolts
Courtesy of GENERAL MOTORS CORP.
Remove the seat cover J-strips (1) from the seat cushion trim panel (2).

Fig 3: Removing/Installing Seat Cover J Strips
Courtesy of GENERAL MOTORS CORP.
Remove the screws securing the seat cushion trim panel to the seat frame.

Fig 4: Removing/Installing Seat Cushion Trim Panel Retaining Screws
Courtesy of GENERAL MOTORS CORP.
Remove the seat cushion trim panel.