LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Cushion Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat bracket trim cover.
  2. Remove the hydraulic jack from the jack stowage area, on the left side only.
  3. Position the seat cushion assembly in order to gain access to the 2 rear seat mounting nuts.
    Fig 1: Removing/Installing Seat Cushion Assembly & Mounting Nuts
    GM722615Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 mounting nuts.
  5. Remove the seat cushion assembly from the vehicle.
scientia non olet · About LEMON Manuals