LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Cushion Latch Release Assembly Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion assembly from the vehicle. Refer to Seat Cushion Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) .
  2. Remove the rear-seat cushion cover and the pad. Refer to Seat Cushion Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)  or Seat Cushion Cover and Pad Replacement - Rear No. 1 (Trailblazer EXT, Envoy XL) .
  3. Remove the strap (1) from the rear seat cushion latch (2).
    Fig 1: Locating Rear Seat Cushion Latch & Strap
    GM753718Courtesy of GENERAL MOTORS CORP.
  4. Remove the 3 bolts securing the rear seat cushion latch to the seat pan.
    Fig 2: View of Rear Seat Cushion Latch
    GM753717Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals