LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Rear No. 1 (Trailblazer EXT, Envoy XL) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the J-strips that retain the cover to the seat pan.
    Fig 1: Locating Rear Seat Cover J Strips
    GM828226Courtesy of GENERAL MOTORS CORP.
  2. Compress the foam and partially remove the seat cover assembly from the seat pan.
    IMPORTANT: When separating the seat cover retaining strips, do not pull the adhesive-backed strip from the seat pad.
  3. Remove the cover from the cushion by separating the retaining strips.
  4. Separate and remove the cushion and cover assembly from the seat pan.
  5. Release the reinforcement bar from the hog-rings.
  6. Remove the cover from the cushion.
scientia non olet · About LEMON Manuals