LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Cushion Bracket Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the bracket assembly on the seat cushion.
    Fig 1: Removing/Installing Seat Cushion Bracket Assembly
    GM753711Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the 2 bolts securing the bracket assembly to the seat cushion.

    Tighten:  Tighten the rear seat cushion bracket bolts to 25 N.m (18 lb ft).

    Fig 2: View of Seat Cushion Bracket
    GM753713Courtesy of GENERAL MOTORS CORP.
  3. Install the rear seat cushion assembly in the vehicle. Refer to Seat Cushion Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) .
scientia non olet · About LEMON Manuals