LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Back Release Latch Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)  or Seat Back Cover and Pad Replacement - Rear No. 1 (Trailblazer EXT, Envoy XL) .
  2. Remove the release latch by pinching the lower locking tabs together.
    Fig 1: Compressing Lower Locking Tabs On Release Latch
    GM753536Courtesy of GENERAL MOTORS CORP.
  3. Remove the release cable from the release latch.
    Fig 2: View of Seat Back Release Latch Cable
    GM753552Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals