LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Back Panel Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bucket seat assembly from the vehicle. Refer to Seat Replacement - Front Bucket .
  2. Remove the front seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  3. Remove the lumbar cables from the panel clips.
    Fig 1: View Of Lumbar Cables & Clips
    GM753524Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 push-pin fasteners (1) from each side of the panel.
    Fig 2: Locating Seat Back Panel Push-Pin Side Fasteners
    GM753491Courtesy of GENERAL MOTORS CORP.
  5. Remove the push-pin fastener (1) from the bottom of the panel.
    Fig 3: Identifying Seat Back Panel Push-Pin Bottom Fastener
    GM784461Courtesy of GENERAL MOTORS CORP.
    6. Fig 4: Removing/Installing Seat Back Panel
    GM753523Courtesy of GENERAL MOTORS CORP.
  6. Remove the panel from the top of the seat-back frame.
  7. Remove the seat-back frame.
scientia non olet · About LEMON Manuals