LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Back Hinge Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from the vehicle. Refer to Seat Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL) .
  2. Remove the inboard/outboard rear seat back cushion latch covers. Refer to Seat Back Hinge Cover Replacement - Rear No. 1 .
  3. Remove the rear center seat belt anchor nut (2), if replacing the left-hand seat inboard hinge.
    Fig 1: View Of Rear Center Seat Belt Anchor Nut
    GM828141Courtesy of GENERAL MOTORS CORP.
  4. Remove the seat belt side buckle nut (2), if replacing the right-hand seat inboard hinge.
    Fig 2: Identifying Seat Belt Side Buckle Nut
    GM831437Courtesy of GENERAL MOTORS CORP.
  5. Remove the seat back cover and pad high enough to expose the seat back mounting bolts. Refer toSeat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)  or Seat Back Cover and Pad Replacement - Rear No. 1 (Trailblazer EXT, Envoy XL) .
  6. Remove the seat back mounting bolts (2) securing the rear seat back frame to the inboard/outboard rear seat back hinge assembly.
    Fig 3: Removing/Installing Seat Back Cushion Mounting Bolts
    GM828223Courtesy of GENERAL MOTORS CORP.
  7. Remove the seat cushion mounting bolts (1) securing the rear seat cushion frame to the inboard/outboard rear seat back hinge assembly.
  8. Remove the seat back assembly.
scientia non olet · About LEMON Manuals