LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear No. 2 >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the head restraint assembly. Refer to Head Restraint Replacement - Rear Seat .
  2. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Rear No. 2 .
  3. Remove the two bolts (1) securing the outer riser assembly to the seat back frame.
    Fig 1: Locating Outer Riser Assembly Mounting Bolts
    GM824165Courtesy of GENERAL MOTORS CORP.
  4. Remove the two bolts securing the inner riser assembly to the seat back frame.
  5. Remove the seat back.
scientia non olet · About LEMON Manuals