LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the latch release cable to the right-hand hinge bracket.
    Fig 1: Locating Latch Release Cables On Right-Hand Bracket
    GM753544Courtesy of GENERAL MOTORS CORP.
  2. Install the seat belt retractor assembly, on the left side only. Refer to SEAT BELT RETRACTOR REPLACEMENT - NO. 1 CENTER REAR (TRAILBLAZER, ENVOY AND BRAVADA) or SEAT BELT RETRACTOR REPLACEMENT - NO. 1 CENTER REAR (TRAILBLAZER EXT, ENVOY XL) in Seat Belts.
  3. Install the seat back hinge brackets. Refer to Seat Back Hinge Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL)  or Seat Back Hinge Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) .
  4. Install the head restraint retractor assembly. Refer to Head Restraint Retractor Assembly Replacement - Rear No. 1 .
  5. Install the latch release assembly. Refer to Seat Back Release Latch Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) .
  6. Install the latch release cables (1) and the head rest restraint cable (2) to the left-hand hinge bracket.
    Fig 2: View Of Latch Release Cable & Head Rest Restraint Cable
    GM753531Courtesy of GENERAL MOTORS CORP.
  7. Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)  or Seat Back Cover and Pad Replacement - Rear No. 1 (Trailblazer EXT, Envoy XL) .
scientia non olet · About LEMON Manuals