Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the rear seat adjuster cross bar (2) to the seat with two bolts (3).
Tighten: Tighten the rear seat adjuster cross bar bolts to 25 N.m (18 lb ft).

Fig 1: Removing/Installing J-Strip, Mounting Bolts & Seat Adjuster Cross Bar
Courtesy of GENERAL MOTORS CORP.
Install the J-strip (1) to the seat adjuster cross bar (2).
Hook the seat back cushion extension panel strap (1) to the extension panel (2).

Fig 2: Identifying Seat Back Cushion Extension Panel Strap & Extension Panel
Courtesy of GENERAL MOTORS CORP.