LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Lumbar Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat from the vehicle. Refer to Seat Replacement - Front Bucket .
  2. Remove the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
  3. Remove the seat back panel. Refer to Seat Back Panel Replacement - Front .
  4. Disconnect the electrical connector from the lumbar motor.
  5. Detach the lumbar clip from the top of the seat back frame.
  6. Remove the lumbar motor mounting screw.
    Fig 1: Removing/Installing Lumbar Motor Mounting Screw
    GM753526Courtesy of GENERAL MOTORS CORP.
  7. Remove the lumbar assembly from the seat.
scientia non olet · About LEMON Manuals