LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Head Restraint Guide Replacement - Rear No. 1 >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the head restraint. Refer to Head Restraint Replacement - Rear Seat .
  2. Remove the seat back cover and pad high enough to expose the head restraint guides. Refer toSeat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)  or Seat Back Cover and Pad Replacement - Rear No. 1 (Trailblazer EXT, Envoy XL) .
  3. Remove the head restraint guides by squeezing the retaining tabs (1) located at the bottom of the guides together.
    Fig 1: Locating Head Restraint Guide Retaining Tabs
    GM828219Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals