LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1571 (Power Seat System) >> Repair Instructions >> Head Restraint Guide Replacement - Rear No. 1 >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the head restraint guides by pushing the guides into the frame until the retaining tabs (1) lock the guide in place.
    Fig 1: Locating Head Restraint Guide Retaining Tabs
    GM828219Courtesy of GENERAL MOTORS CORP.
  2. Install the seat back cover and pad to the seat back. Refer toSeat Back Cover and Pad Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada)  or Seat Back Cover and Pad Replacement - Rear No. 1 (Trailblazer EXT, Envoy XL) .
  3. Install the head restraint. Refer to Head Restraint Replacement - Rear Seat .
scientia non olet · About LEMON Manuals