LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1570 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory Left >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left .
  2. Remove the knee bolster trim panel. Refer to Trim Panel Replacement - Knee Bolster .
  3. Remove the 2 headlamp trim plate retaining nuts.
    Fig 1: Removing/Installing Headlamp Trim Plate & Retaining Nuts
    GM712835Courtesy of GENERAL MOTORS CORP.
  4. Use a plastic flat bladed tool in order to release the retaining clips.
  5. Remove the headlamp trim plate from the instrument panel (IP).
scientia non olet · About LEMON Manuals