LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1570 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left .
  2. Remove the knee bolster trim panel. Refer to Trim Panel Replacement - Knee Bolster .
  3. Remove the 4 knee bolster retaining nuts.
    Fig 1: Removing/Installing Knee Bolster & Retaining Nuts
    GM712844Courtesy of GENERAL MOTORS CORP.
  4. Remove the knee bolster from the steering column support bracket.
scientia non olet · About LEMON Manuals