LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1570 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Door Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the storage compartment to the IP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the 3 screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

    Fig 1: Removing/Installing Storage Compartment & Retaining Screws
    GM740923Courtesy of GENERAL MOTORS CORP.
  3. Install the right closeout/insulator panel. refer to Closeout/Insulator Panel Replacement - Right .