LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1570 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Console Storage Bin Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the storage bin to the console.
    Fig 1: View Of Console Storage Bin
    GM741607Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the 6 screws that retain the storage bin to the console.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  3. Install the rubber mats covering the retaining screws.
  4. Close the storage bin cover.
scientia non olet · About LEMON Manuals