LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1570 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Console Shift Lever Bezel Replacement (Oldsmobile) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Block the wheels to prevent the vehicle from moving.
  2. Remove the floor shift control boot from the floor console. Refer to FLOOR SHIFT KNOB .
  3. Adjust the shift lever fully rearward.
  4. Remove the console storage bin. Refer to Console Storage Bin Replacement .
  5. Remove the bezel from the floor console by releasing the retaining clips.
    Fig 1: Removing/Installing Console Shift Lever Bezel & Retaining Clips
    GM741614Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals