Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Position the retaining ring to the mounting hole.
Index the key to the retaining ring to the slot in the mounting hole.

Fig 1: Removing/Installing Socket Retaining Ring
Courtesy of GENERAL MOTORS CORP.
Install the retaining ring by pressing the retaining ring into the mounting hole until fully seated.
Connect the electrical connector to the socket.

Fig 2: Disconnecting/Connecting Socket Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Position the socket to the retaining ring.
Install the socket into the retaining ring by pressing in the socket until fully seated.

Fig 3: Installing Socket Into Retaining Ring
Courtesy of GENERAL MOTORS CORP.
Install the 12-volt power supply or cigar lighter fuse.