Oil Pump, Pump Screen and Deflector Removal
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil pump screen bolt and nuts.
- Remove the oil pump screen with O-ring seal.
- Remove the O-ring seal from the pump screen.
- Discard the O-ring seal.
- Remove the remaining crankshaft oil deflector nuts.
- Remove the crankshaft oil deflector.
- Remove the oil pump bolts.
- Remove the oil pump.
IMPORTANT:
Do not allow dirt or debris to enter the oil pump assembly. Cap ends as necessary.