LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1560 (Propeller Shaft) >> Repair Instructions >> Flexplate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Bolts & Flexplate To Flexplate Spindle
    GM499202Courtesy of GENERAL MOTORS CORP.
  1. Remove the driveline support assembly and separate it from the transmission. Refer to Driveline Support Assembly Replacement (Automatic Transmission)  or Driveline Support Assembly Replacement (Manual Transmission) 
  2. Remove the bolts mounting the flexplate to the flexplate spindle.
  3. Remove the flexplate.
scientia non olet · About LEMON Manuals