LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1560 (Propeller Shaft) >> Repair Instructions >> Driveline Tunnel Closeout Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the catalytic converters. Refer to Catalytic Converter Replacement in Engine Exhaust.
  3. Remove the driveline tunnel closeout panel bolts.
    Fig 1: View Of Driveline Tunnel Closeout Panel & Bolts
    GM67894Courtesy of GENERAL MOTORS CORP.
  4. Remove the closeout panel.
scientia non olet · About LEMON Manuals