LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1560 (Propeller Shaft) >> Diagnostic Information and Procedures >> Squeak Noise

Squeak Noise

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Squeak Noise

Cause Correction
A broken or missing snap ring on the rear bearing housing assembly - manual transmission applications only A broken or missing snap ring on the rear bearing housing may allow the propeller shaft assembly to move forward in the driveline tube. In those situations, the shoulder of the input shaft will contact the outer race of the clutch pilot bearing and create a "squealing or squeaking" type noise with the clutch pedal depressed.
scientia non olet · About LEMON Manuals